View MX6AWT-A1-0000-0009E7_4561146.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Cree(R) XLamp(R) MX-6 LEDs
Data Sheet
The Cree XLamp MX-6 LED provides the proven lighting-class performance and reliability of Cree XLamp LEDs in a flat-top PLCC package. The XLamp MX-6 LED continues Cree's history of innovation in LEDs for lighting applications with wide viewing angle, unlimited floor life, uniform light output without secondary optics and electrically neutral thermal path. The XLamp MX-6 LED brings high performance and quality of light to a wide range of lighting applications, including linear lighting, LED light bulbs, fluorescent retrofits and retail-display lighting.
FEATURES * * * * * * * Available in white (2,600 K to 8,300 K CCT) Maximum drive current: 1000 mA Wide viewing angle: 120 Electrically neutral thermal path Qualification at max drive current RoHS-compliant Unlimited floor life at 30C/85% RH
Table of Contents
Flux Characteristics (TJ = 25C)................................................................................................................. 2 Characteristics ........................................................................................................................................ 2 Relative Spectral Power Distribution ........................................................................................................... 3 Relative Flux vs. Junction Temperature (IF = 300 mA)................................................................................... 3 Electrical Characteristics (TJ = 25C) .......................................................................................................... 4 Relative Flux vs. Current (TJ = 25C) ......................................................................................................... 4 Thermal Design ....................................................................................................................................... 5 Typical Spatial Distribution ........................................................................................................................ 5 Reflow Soldering Characteristics ................................................................................................................ 6 Notes ..................................................................................................................................................... 7 Mechanical Dimensions (TA = 25C) ........................................................................................................... 8 Tape and Reel ......................................................................................................................................... 9 Packaging ............................................................................................................................................. 10
ev 2 CLD-DS23 R Data Sheet:
Subject to change without notice. www.cree.com/xlamp
1
Flux Characteristics (TJ = 25C)
The following table provides several base order codes for XLamp MX-6 LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp MX-6 LED Binning and Labeling document.
Color
CCT Range
Base Order Codes Min Luminous Flux (lm) @ 300 mA Group Q4 Q5 Q3 P4 Flux (lm) 100 107 93.9 80.6
Calculated Min Luminous Flux (lm) @ 350 mA* Flux (lm) 114 122 107 92
Order Code
Min. Cool White 5,000 K 3,700 K 2,600 K
Max. 8,300 K 4,300 K 3,700 K
MX6AWT-A1-0000-000C51 MX6AWT-A1-0000-000D51 MX6AWT-A1-0000-000BE5 MX6AWT-A1-0000-0009E7
Warm White
* Calculated values for reference purposes only.
Notes: * Cree maintains a tolerance of +/- 7% on flux measurements. * Typical CRI for Cool White (4,300 K - 8,300 K CCT) is 75. * Typical CRI for Warm White (2,600 K - 4,300 K CCT) is 80.
Characteristics
Characteristics Thermal resistance, junction to solder point Viewing angle (FWHM) Temperature coefficient of voltage ESD classification (HBM per Mil-Std-883D) DC forward current Forward voltage (@ 300 mA) LED junction temperature mA V C 3.3 Unit C/W degrees mV/C Minimum Typical 5 120 -3.3 Class 2 1000 3.8 150 Maximum
* The increase of maximum forward current to 1000 mA for XLamp MX-6 White is retroactive and applies to all XLamp MX-6 White LEDs produced by Cree. This increase is the result of more extensive testing that was performed after the initial product launch.
Copyright (c) 2009-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
2
CLD-DS23 Rev 2
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp
Relative Spectral Power Distribution
100
Relative Spectral Power
Relative Radiant Power (%)
80
60
5000K - 8300K CCT 3500K - 5000K CCT 2600K - 3500K CCT
40
20
0 400 450 500 550 600 650 700 750
Wavelength (nm)
Relative Flux vs. Junction Temperature (IF = 300 mA)
100%
Relative Flux Output vs. Junction Temperature
90%
Relative Luminous Flux
80%
70% 60% 50% 40% 30% 20% 10% 0% 25 50 75 100 125 150
Junction Temperature (C)
Copyright (c) 2009-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
3
CLD-DS23 Rev 2
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp
Electrical Characteristics (TJ = 25C)
1000
900
800
Forward Current (mA)
700 600 500 400 300 200
100
0 2.50 2.75 3.00 3.25 3.50 3.75 4.00 4.25 4.50
Forward Voltage (V)
Relative Flux vs. Current (TJ = 25C)
300
Relative Luminous Flux (%)
250
200
150
100
50
0 100 200 300 400 500 600 700 800 900 1000
Forward Current (mA)
Copyright (c) 2009-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
4
CLD-DS23 Rev 2
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp
Thermal Design
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics.
1200
1000
Maximum Current (mA)
800
600
400
Rj-a = 10C/W Rj-a = 10C/W Rj-a = 20C/W Rj-a = 20C/W Rj-a = 30C/W Rj-a = 30C/W Rj-a = 40C/W Rj-a = 40C/W
200
0
0 25 50 75 100 125 150
Ambient Temperature (C)
Typical Spatial Distribution
120
Relative Luminous Intensity (%)
100
80
60
40
20
0
-100 -80 -60 -40 -20 0 20 40 60 80 100
Angle ()
Copyright (c) 2009-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
5
CLD-DS23 Rev 2
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp
Reflow Soldering Characteristics
In testing, Cree has found XLamp MX-6 LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
Profile Feature Average Ramp-Up Rate (Tsmax to Tp) Preheat: Temperature Min (Tsmin) Preheat: Temperature Max (Tsmax) Preheat: Time (tsmin to tsmax) Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) Peak/Classification Temperature (Tp) Time Within 5C of Actual Peak Temperature (tp) Ramp-Down Rate Time 25C to Peak Temperature
Lead-Based Solder 3C/second max. 100C 150C 60-120 seconds 183C 60-150 seconds 215C 10-30 seconds 6C/second max. 6 minutes max.
Lead-Free Solder 3C/second max. 150C 200C 60-180 seconds 217C 60-150 seconds 260C 20-40 seconds 6C/second max 8 minutes max.
Note: All temperatures refer to topside of the package, measured on the package body surface.
Copyright (c) 2009-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
6
CLD-DS23 Rev 2
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp
Notes
Lumen Maintenance Projections Based on internal long-term reliability testing, Cree currently projects cool white and neutral white (chromaticity bins 0A - 6D4) XLamp MX-6 LEDs to maintain an average of 70% or higher lumen maintenance after 10,000 hours, provided the LED is operated with a constant current of up to 500 mA and ambient air temperature around the LED is maintained at or below 85C. Based on internal long-term reliability testing, Cree currently projects warm white (chromaticity bins 7A1 - 8D4) XLamp MX-6 LEDs to maintain an average of 70% or higher lumen maintenance after 25,000 hours, provided the LED is operated with a constant current of up to 500 mA and ambient air temperature around the LED is maintained at or below 85C. Please read the XLamp Long-Term Lumen Maintenance application note for more details on Cree's lumen maintenance testing and forecasting. Please read the XLamp Thermal Management application note for details on how thermal design, ambient temperature and drive current affect the LED junction temperature. ENERGY STAR Recommendation Cree currently recommends a maximum drive current of 350 mA for XLamp MX-6 white in designs seeking the ENERGY STAR* 35,000 hour lifetime rating ( 94.1% luminous flux @ 6000 hours) or 25,000 hour lifetime rating ( 91.8% luminous flux @ 6000 hours). * These lifetime ratings are based on the current ENERGY STAR Solid State Lighting Luminaires V1.1 (December 12, 2008) and ENERGY STAR Integral LED Lamps V1.0 (December 3, 2009) lumen maintenance criteria. Moisture Sensitivity In testing, Cree has found XLamp MX-6 LEDs to have unlimited floor life in conditions 30C / 85% relative humidity (RH). Moisture testing included a 168 hour soak at 85C / 85% RH followed by 3 reflow cycles, with visual and electrical inspections at each stage. RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright (c) 2009-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
7
CLD-DS23 Rev 2
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp
Mechanical Dimensions (TA = 25C)
All measurements are .13 mm unless otherwise indicated.
Top View
Top View
Bottom View
Side View
Recommended FR4 Solder Pad
Recommended MCPCB Solder Pad
Alternative Solder Pad
Copyright (c) 2009-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
8
CLD-DS23 Rev 2
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp
4.0.1 1.75.10 8.0.1
1.5.1
2.5.1 Cathode Side
Tape and Reel
+.3 12.0 .0
All dimensions in mm.
END
Anode Side User Feed Direction (denoted by + and circle) END
START User Feed Direction
START
Trailer 160mm (min) of empty pockets sealed with tape (20 pockets min.)
Loaded Pockets (1,000 Lamps)
Leader 400mm (min) of empty pockets with at least 100mm sealed by tape (50 empty pockets min.) User Feed Direction
Cover Tape
Pocket Tape
13mm 7"
Copyright (c) 2009-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
9
CLD-DS23 Rev 2
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp
Packaging
Dessicant Desiccant (inside bag) (inside bag) Humidity Indicator Humidity Indicator Card (inside bag) (inside bag)
All dimensions in mm.
Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag
Label with Cree Bin CREE Bin Code & Barcode Label # Code, Qty, Lot Label with CREE Bin Code Cree Bin & Barcode Label Code, Qty, Lot #
Labelwith CustomerBin Label with Cree P/N, Qty, Lot Lot # Code, Qty, #, PO # Label with Cree Bin Label with Customer P/N, Qty, Lot #, PO Code, Qty, Lot# #
Patent Label Patent Label Label with Customer Order Code, Qty, Reel ID, PO # Label with Customer Order Code, Qty, Reel ID, PO #
Label with Customer Order Code, Qty, Reel ID, PO#
Label with Cree Bin Code, Qty, Lot #
Copyright (c) 2009-2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
10
CLD-DS23 Rev 2
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp

▲Up To Search▲

Price & Availability of MX6AWT-A1-0000-0009E7

	To Download MX6AWT-A1-0000-0009E7 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .